NANO-GX User Manual
Page 70
Figure 4-5: CRT/LCD Mode Select Jumper Pinout Location
4.3.4 LCD Panel (LVDS/TTL) Voltage Select
WARNING:
Permanent damage to the screen and NANO-GX may occur if the
wrong voltage is selected with this jumper. Please refer to the user
guide that cam with the monitor to select the correct voltage.
Jumper Label: JP7
Jumper Type:
3-pin header
Jumper Settings:
See
Table 4-5
Jumper Location:
See
Figure 4-6
The LCD Panel (LVDS/TTL) Voltage Select jumper allows the LVDS screen voltage to
be set. The jumper settings are shown in
Table 4-5.
JP7 Description
1-2 +3.3V LVDS Default
2-3 +5V LVDS
Table 4-5: LVDS Voltage Selection Jumper Settings
The LCD Panel (LVDS/TTL) Voltage Select jumper location is shown in Figure 4-6.
Comments to this Manuals